This Mod is down to personal preffernce, some people like it, some don't.
In this little guide we show you how to remove the stock ford badges and emblems
Tools Needed:
Heat gun
Fishing Line
Tar Remover
Cloth
T Cut or Colour Restore
Finger Nails!!
|
Remove that badge!
|
What you are aiming for
Nice and shiny
|
|
Lets start with the Ford badge
Go to the back of your car, locate the badges
these can either be hard plastic or just stickers
Either side of the numberplate.
|
|
To do this properly you need to heat up the badge with either
a hair dryer or heat gun, be carful as it might damage the paint.
Whilts hot , use either your finger nails or the fishing line
to lift the badge from the paintwork.
DO NOT use a screwdriver or sharp object as the paint will scratch!
as you can see in the next picture.
Now you are left with a gunk/glue type substance
|
|
Clean off the gunk with the Tar remover and then t cut or colour restore the area,
wash and polish the area and admire your work.
This will then leave you with the desired effect.
|
|
|
This same procedure should be used for the fiesta badge as well,
It must be noted that the front ford badge has a small hole behind it
that would need to be filled.
|
|
There you have it, a nice simple little guide
Hope this guide is of some help.
Guide Written and © On 11th May 2005 by Andrew Whiteman (AW3K)
|
