Not a mod as such, more like a guidence to help you fit our stickers
In this little guide we show you how to prep your glass and apply the stickers correctly
Tools Needed:
Glass Cleaner
Paper Towels
Cloth or duster
Finger Nails!!
|
Sticky
|
What you are aiming for
Stuck
|
|
1. Get all your cleaning products out, Thats glass cleaner, cloth/duster and some paper towels
|
|
2. Get your stickers ready, which ever colour require
|
|
4. Get your glass, i had the glass out of my car, but you will have to go to the car instead.
|
|
5. Spray the glass cleaner on to the glass and wipe clean with a paper towel.
|
|
6. Wipe the glass clean with the cloth or duster.
|
|
7. Measure in about 3 inch from the edge of the glass and place the sticker on the glass.
(You dont have to put it there, you can put it anywhere)
|
|
8. Peel the backing sheet off taking care not to leave any of the sticker on it.
|
|
9. All the sticker should now be on the front sticky sheet.
|
|
10. Position the sticker where it should be, you cna pull it up and move it where you want it.
|
|
11. Use the cloth and smooth the sticker down. Press hard to get all the bubbles out
|
|
12. Pull the protective sheet off the front of the sticker.
|
|
13. the sticker is now stuck but i would advise you use the cloth and rub out any bubbles left.
|
|
14. The opposite side will look different.
|
|
15. There you have it, they look nice.
|
|
There you have it, How to avoid a sticky mess
Hope this guide is of some help.
Guide Written and © On 03 Dec 2006 by Andrew Whiteman (AW3K)
|
